IMADA specializes in
force measurement
Product Search
Solution Search
Searchable by product name, product model or standard.
*To search by solution, switch to “solution search.”
i.e., Load Cells, ZTA-50N, 7864 (for ISO 7864)
Searchable by you force type, industry, standard or product sample.
*To search by product, switch to “product search.”
i.e., Compression, 7864 (for ISO 7864)
SEARCH
Compression-Tension Test
- Force Measurement IMADA
- SOLUTIONS
- Compression-Tension Test
Compression-Tension Test
Compression-Tension test, as the name implies, is the test in which forces in the compressive and tension directions are applied during the same test to evaluate their interaction characteristics. Tack test and Extraction/Insertion test are described in detail.
: Tack test is one of the evaluation methods for adhesion and stickiness. The probe is pressed against the sample at a pre-set force value, and after a certain period of time, it is pulled away from the sample to measure the force at which the probe is removed from the sample.
: Extraction/Insertion test measures the resistance force (exertion/insertion force) when the probe is inserted or extracted. The force you may feel when you insert (or pull out) USB memory or SD card into an electronic device such as PC is an obvious example. The change of resistance is measured by repeatedly inserting and removing the device.
.webp)
Extraction/Insertion Test
USB connector extraction/insertion test
Insert/Extract
Graph
inquiry number
3B2001A
Spray Bottle Cap Insertion-Extraction Test
Insert/Extract
Graph
inquiry number
3B2002A
Present the “inquiry number” below when you contact us, for prompt assistance.
example
inquiry number
1A1111A
UnitConverter
Unit ConverterConvenient Unit/Torque/
Tension conversion
6 Significant Digits (*Significant digits are meaningful digits that do not include zeros, which are used to indicate the scale.)
Products
HERE!
Attachments, Grips & Fixtures
Custom Made
Measurements in Special Environment
Temperature and Angle Adjustable Peel Tester
Spot Welding Pressure Gauge
Attachment to Bend Sample 90 Degrees
Horizontal Test Stand with Fine Adjustment Knob
Tester With Thermostatic Chamber
Tester With Far-infrared Heater
Table for Compression Load Cell
Test Stand for Testing at the Desired Position
Particular Samples Measurements
Peel Test Fixture for Crimped Postcard
Attachment for Fixing Wide and Thin Materials
Attachment for Wine Cork Extraction Test
Attachments for 90 degree score bend test
Attachments to measure forces to open flat pack carton
Attachments for break strength testing of lipsticks or lip balms
High capacity dual-column motorized test machine for compression test
Film Grip with Openable Gripping Part
Pantograph Grip with Pressurization Mechanism
Motorcycle Accelerator Torque Test Fixture
Peel Test Fixture for Solar Cell Ribbon
Test Stand With Large Table
Compression Test Attachment for LCD Panel
L-shaped Sample Fixture
Attachment for Opening/Closing Force Test of Takeout Container Lid
Attachment for Squeezing Force Test of Eye Drop Bottles
Compression Test Attachment for Squeeze Tube
Attachment for Welded Nut Tension Test
Attachment for Tube Tension Strength Test
Attachment for Hard-to-Grip Samples
Attachment for Compression Test of Nasal Spray
Individually Adjustable Torque Chuck Attachment
Resistance Force Measurement jig for Hair Combing Test
Attachment for Lateral Compression Test of Cup Containers
Biaxial Tension Tester
Resize & Modification
Press Test Fixture (Wide Size)
Remote Control Switch for Motorized Test Stand
Semi-Customized Compression Attachments
Large Size of Compression Tester
Large Size of 90 Degree Peel Tester
Force Control Cable with Signal Output Box
Manual Test Stand with Displacement Output Option
Cutting Base Plate with groove and knife edge probe
Upper attachment for 4-point bending test
Main shaft stopper with a butterfly screw for MTS series
Wide Rubber Roller for Peel Test
Motorized Rubber Roller for Peel Test
Peel Fixture for Packaged Cooked Rice Lid
Cam grip with spring
Wedge Grip Without Adaptor
Customized Peeling Tester
Test Stand with 3-stage Force/Displacement setting/holding function
Standards-Compliant Measurement
ISO 14704: 2000 Fine Ceramics 4-Point Bend Tester
Ampoule 3-Point Bend Tester
ISO/IEC 10373-1: 2006 Peel Tester of Identification Card
ISO 17480: 2015 Peel Tester for Gable-Top Package
ASTM D1894: 2014 Coefficient of Friction (COF) Tester
Attachments for score bend test
ISO 17480: 2015 45 Degree Complete Peel Test Fixture for Container Lid
IEC 61010-1 (2010) Spherical Jig for Compression Testing
